Oxygen Sensor Socket 22mm For Land Rovers And Range Rovers

(Total of 16 customer reviews) | Review this item

5 out of 5 stars | Date Posted: 03-06-2024

By: Dirk Ishiwata

The item worked out well for me. Delivery was timely and the quality and workmanship outstanding!

5 out of 5 stars | Date Posted: 03-14-2023

By: Brent Stone

I was able to get the 2 downstream sensors on my LR3 fairly easily with a normal ratchet, but the upstreams are a pain in the a$$. So I ordered this part. It definitely helps with getting up there and the angles, BUT, I also had to order a long handle (13"+) ratchet/breaker bar to get up there far enough to get to the upstreams. My normal 8" Hazet Ratchet wasn't long enough. That's just my 2 cents!

5 out of 5 stars | Date Posted: 12-16-2020

By: Christopher Williams

The right tool for the right job... Definitely made changing out the O2 sensors much easier. Would recommend for others to use.

5 out of 5 stars | Date Posted: 09-23-2020

By: Anthony Fantaroni

This socket makes changing O2 sensors a snap. Just bang it with a hammer.

5 out of 5 stars | Date Posted: 05-21-2020

By: Crystal Masters

A must have when replacing O2 sensors

5 out of 5 stars | Date Posted: 04-27-2020

By:

The right tool for the job! Replaced all four O2 sensors in under 3 hours (home mechanic, generally handy, always willing to learn, but by no means professionally trained). This tool fits into the small spaces and allows for good leverage to break the sensors free without risk of stripping the threads or damaging connectors. Worked flawlessly.

4 out of 5 stars | Date Posted: 06-20-2019

By: Andres Sermini

Is a great tool to have for those stuck oxygen sensors, keep in mind that a regular 22mm wrench will be also needed for bank 2 rear 2.

5 out of 5 stars | Date Posted: 05-02-2019

By: Greg Alberto

I'd recommend this if you don't have a similar tool. Made swapping O2 sensor easy.

5 out of 5 stars | Date Posted: 10-13-2018

By: Norm Jacobs

Wasn't really sure if it would save me any time over a flat wrench, I am happy to say it really did make the job faster both removing and installing. Glad I bought it.

5 out of 5 stars | Date Posted: 04-13-2018

By: James stewart

To be honest I was expecting some cheap china crap. Instead this is well made china crap! Ok I don’t know about the China part, but it’s a well made piece of kit that served its purpose with the working end of a hammer.

5 out of 5 stars | Date Posted: 10-13-2017

By: J. Clayton Read

Solid tool and I service high milage Land Rover Discovery II machines. So far I have not needed this tool but I am sure that I will.

5 out of 5 stars | Date Posted: 06-01-2017

By: Luke Smith

If you are going to change an O2 sensor you must have this socket. The downstream O2 sensors were in a tough spot to get to but the socket was easy to slip on. Quite a few strikes with a ball peen hammer on the socket, via a metal bar, and the sensors came right out.

5 out of 5 stars | Date Posted: 03-08-2017

By: Ronald Dade

Git 'er done with this simple, reasonably priced tool. What I like is the heavy construction, allowing you to rap on it once or twice with a "convincer" and the sensor unscrews with your fingers! Why make it harder than necessary?

5 out of 5 stars | Date Posted: 02-15-2016

By: Hans Schwers

Received the product quickly. The socket worked as a good tool should. No feeling that the socket would give up and fail as others that I've had. I would recommend this product if your looking for a quality built piece.

5 out of 5 stars | Date Posted: 12-24-2015

By: Justin Hancock

The oxygen sensor socket was perfect for the sensors under my disco; saved me a lot of time on the replacement job.

5 out of 5 stars | Date Posted: 04-20-2015

By: Joseph Fryoux

Did the job o-2 sensors changed. No more codes coming up. all codes cleared

View all 16 customer reviews